Are you looking for best shockmount for audio technica at2020, we’ve consulted top experts who has in-and-out knowledge about the shockmount for audio technica at2020. We choose the top most quality product, which comes with amazing features you’ve never heard before. We have filter more than 100+ of product to give you top 10 list of best shockmount for audio technica at2020.
This list is undoubtedly the best shockmount for audio technica at2020 available in the market today. However, if you don’t want to spend more time on filtering and finding which one is good shockmount for audio technica at2020, then you should absolutely go for our Top list of the winner. which comes with all the basic features one could expect in a shockmount for audio technica at2020.
Best shockmount for audio technica at2020 – The Winners!
But these three has some more competitions too, Check out below List of Top 10 best shockmount for audio technica at2020.
If you are ready to choose a new shockmount for audio technica at2020, check out our recommendations for the best shockmount for audio technica at2020. But if you’d like to learn more about the various types of shockmount for audio technica at2020 available and how to choose the right one for you, read on.
List of Top 10 Best shockmount for audio technica at2020 In Detailed
Bestseller No. 1
SUNMON AT2020 Shock Mount, Shock Mount Stand Reduces Vibration Noise for Audio Technica AT2020 AT2035 AT4040 AT2020USB ATR2500x Condenser Micphone
- Suspension shock mount mic holder isolates condenser mics from most physical vibration, floor noise. Like floor tapping, desk bumping, adjusting the boom.
- Shockmount made of elasticity rope, the plastic shock mount prevents the microphone from falling all-around and makes your AT2020 microphone more convenient to install.
- Widely used for Audio Technica AT2020 AT2035 AT4040 AT2020USB ATR2500x condenser mic.
- The angle-adjustable 3/8" to 5/8" screw adapter is easily attached to any universal mic boom arm or mic stand.
- Fits microphone diameter ranging from 1.9" to 20."（ Φ47mm-51mm）. Package: 1 x Shock Mount.
Bestseller No. 2
AT2020 Shock Mount - Microphone Mounts Reduces Vibration Noise and Shockmount Improve Recording Quality for Audio Technica AT2020 AT2020USB+ AT2035 ATR2500 AT4040 Condenser Mic by YOUSHARES
- Shock mount fit diameter size: ( 45mm-50mm，1.8 inch-2 inch ) microphone, Such as: AT2020, AT2020USB, AT2020USB+, AT2035, AT4040, ATR2500x, AT4033, AT2050, CAD U37, RE20, MXL440, MXL 500, MXL 4000, MXL V67G, MXL550, Floureon BM700, Floureon BM800, Rode NT1
- Shock mount Diameter size: ( 45mm-50mm，1.8 inch-2 inch ) , Compatible with many condenser Microphone. Shock Mount isolates the microphone from noise, shock and vibrations. Like floor tapping, desk bumping, adjusting the boom, etc.
- Boom Arm Capability - With a 3/8"-5/8" screw adapter. Perfectly match the most of boom arm and microphone stands.
- Exquisite Design - The shock mounts are framed with an easy pinch-to-open clamp and a nice foam padding.
- Great for your YouTube videos, podcasting, online games. Package include Microphone Shock Mount, universal connector adaper.
Bestseller No. 3
Microphone Shock Mount with Pop Filter, Mic Anti-Vibration Suspension Shock Mount Holder Clip for Diameter 46mm-51mm Microphone
- Shock mount (size: 45mm-53mm，1.77inch-2.1inch ) for microphone type: Diameter of 46mm-51mm (1.8 inch-2 inch)microphone. Compatible with Many Condenser Mics Like AT2020, AT2020USB, AT2020USB+, AT2035, AT2020USB, ATR2500x.Please kindly measure your product dimension and confirm the same. If unsure if applicable, please leave your question.
- Pop filter (inner size: 40mm-61mm,1.6 inch-2.4 inch) for microphone head type: Diameter of 46mm-51mm( 1.8 inch-2inch) microphone. Please Verify your microphone size before ordering.
- Boom Arm Capability: The adjustable 3/8" to 5/8" screw adapter is easily attached to most of universal mic boom arm or mic stand.Please kindly measure your product dimension and confirm the same.
- Pop filter:U-shaped double net layer structure, foam layer, metal net layer can effectively reduce the plosive, wind interference, saliva spraying. Shock mount:Made of high quality metal and high elasticity rope. It can protect the microphone all-around with high elasticity wrap roping desigh, (It can not fit blue yeti), which make the microphone more convenient to install and prevente the microphone from falling.
- Package include Microphone Shock Mount + Pop Filter,and come with one universal connector adaper,Combination with these two making your broadcast or singing voice sounds more pleasant.
SaleBestseller No. 4
InnoGear Desktop Microphone Stand, Mic Stand Desk Table with Weighted Base Shock Mount Mic Clip 3/8" to 5/8" Adapter Adjustable Height for Hyper X QuadCast Fifine K669B AT2020 Shure SM58 PGA48
- Compact and Weighted Base: With 4.3"x4.7" base, InnoGear desk microphone stand doesn't taking up much space. The base is weighted 1.32lbs for MAX load 3.3lbs when using heavier microphones that need additional balance. It is constructed of heavy-duty steel for long-term performance.
- Triangle Gravity Design: Unlike other mic stand with central gravity, InnoGear table mic stand provides more stability and precise balance to keep microphone from topple-over.
- Adjustable Height: This stand measures 10.2 inches in height and is adjustable up to 15 inches to allow for optimal mic positioning.
- Compatibility: Package includes 3/8" and 5/8" adapter, making it compatible with many microphones like Blue Yeti, Blue Snowball, AT2020, AT2020USB+, AT2035, ATR2500-USB, ATR2100-USB, etc.
- High Quality Shock Mount: It can protect your microphone all-around with high elasticity wrap roping desigh and reduce vibrations from traveling into the microphone. Please noted the shock mount is not fit for Blue Yeti.
SaleBestseller No. 5
Marantz Professional MPM-1000 - Studio Recording XLR Condenser Microphone with Desktop Stand and Cable – for Podcast and Streaming Projects
- Studio-grade condenser microphone that delivers premium audio performance for crystal clear audio capture - perfect for vocals, acoustic instruments, amplifiers and more
- Directional cardioid polar pattern and pure-aluminum-plated, 18mm-diameter-diaphragm condenser capsule
- Smooth, wide ranging frequency response (20–20,000Hz) captures the full audible spectrum
- High sensitivity and low signal-to-noise ratio captures every subtle nuance of your source audio
- Compact footprint and lightweight form factor for portable audio capture
Bestseller No. 6
Boseen Microphone Shock Mount Mic Holder - Anti Vibration Spider Shockmount Compatible with Many Condenser Mics Like AT2020 MXL 770 MXL 990 Samson G Track Pro Rode Procaster NT1-A Neumann U87 etc.
- Anti vibration and noise - This shock mount mic holder can isolate condenser mics from most physical vibration, floor, and stand noise effectively. And it’s ideal for recording, podcasting, broadcasting and more. It will make your broadcast or singing voice sound better.
- Applicable for many mic types - One shock mount is equipped with 4 different bottom screws, which can compatible with multiple microphone styles, for instance, AT(2020, 2020 USB), Rode(NT1-A, Procaster, Podcaster, K2, NTK, NT2000, NT2-A, NT1000), Samson(C01, C03, C01U, C03U, CL7, CL8), MXL(990, 770, R77, TEMPO, V67G, 2006), AKG(P120, P220, P420) , Blue(Ember, Bird SL, Babybottle SL, Spark SL except Yeti, Snowball, Nano), Neumann U87 and Scarlett Cm25.
- Durable and Adjustable-The shock mount was totally made of Heavy-duty solid metal, except the elastic band and pad. It also came with mounting pads to protect the bottom of the mic. Features an angle adjustable locking knob with a 5/8 inch screw hole, which can be easily attached to any universal mic boom arm or stand.
- ! NOTE ! - 1. The shock mount is not compatible with handheld mic, such as SM58, Q2U, ATR2100. 2. It’s also not suitable for many USB microphone with function knobs, such as Fifine, Blue Yeti/Snowball, Razer. (The threads’ diameters which are less than 20mm are not suitable. Many USB microphones’ bottom threads are 5/8 inch which is far less than 20 mm.) 3. Microphones without threads at the bottom cannot be tightened on our shock mount, such as AT2035/2050, Heil PR40.
- Best service - We promise to provide timely response within 24 hours and lifelong technical guidance.
Bestseller No. 7
Boseen Universal Microphone Shock Mount, Mic Clip Holder Mount for Diameter 47mm-53mm Mic Anti Vibration Adjustable High Isolation Shock Mount
- Universal for many mic types - Our professional suspension shock mount is a nice accessory for condenser microphones diameter ranging from 47mm to 53mm, such as AT2020/2020USB+/2020USBi/2020 xlr/2035/2050/2500/2500USB, AKG P100/P200/P120/P420/C3000B, MXL V67g/V67i, Rode NT1A/NT1, Heil PR40, Razer seiren x, Berhinger C-1, ATR 2500 USB, Neumann TLM102 and so on.
- Great Design and Well-made - Made of solid metal and elastic band. The mic shock mount features a highly flexible surround design that protects the microphone all-around, which make the microphone more convenient to install and prevent the microphone from falling.
- Adjustability and Flexibility - This microphone holder features an angle adjustment with locking knob, so that you can mount it on all the standard microphone stands.
- Anti Vibration and Noise - This mic holder can isolate studio condenser mics from most physical vibration, floor, and stand noise effectively, it will make your broadcast or singing voice sounds more pleasant.
- Please Note - 1. Package includes a microphone shock mount, a screw adapter and a elastic band. 2. The shock mount only fits mic diameter ranging from 47MM to 53MM. Please verify your microphone size before ordering!
Bestseller No. 8
ZRAMO TH106 Black Spider Universal Microphone Shock Mount Holder Adapter Clamp Clip 48-51MM Large Diameter Studio Condenser Mic Anti-Vibration Mic Holder for AT2020 AT2500
- Felt/foam insert to hold and protect microphone
- Fits most 48mm-51mm Microphones
- Material: metal
- PLEASE NOTE:SHOCK MOUNT come with 2 adapter screw( 1 gold and 1 black)
Bestseller No. 9
AT2020 Pop Filter by Vocalbeat - Audio Technica AT2035 Condenser Mic Foam Windscreen from Quality Sponge Material - Mic AT2020 USB Pop Windscreen Filters Recording and Background Noises - Black Color
- Specially designed for the Audio Technica AT2020 line of microphones. Also compatible with the AT2035, AT2050, and AT2040 mic models.
- Premium quality acoustic foam mic cover for best noise cancellation results.
- Pop filter for at 2020 and at 2035 protects your mic from moisture and saliva damage.
- Condenser microphone pop filter covers other similar-sized microphones.
- Great for better Youtube videos, podcasting, online games, and other audio recordings.
- English (Publication Language)
Bestseller No. 10
Audio-Technica AT2020 Mic Boom Arm with Foam Windscreen, Suspension Boom Scissor Arm Stand with Pop Filter Cover for Audio-Technica AT2020 Microphone by SUNMON
- Perfect Boom Arm: Suspension boom arm stand fit your Audio-Technica AT2020 Microphone, you can easily adjust the mic to the suitable angle or height to show your perfect voice.
- Super Windscreen: Foam pop filter designed for AT 2020 mic with high quality acoustic foam material, filter the unwanted background noise to improve your sound quality.
- Stability: Mic boom arm is dual suspension springs on each boom arm, protects the microphone from shaking, sinking and making noise.
- Mic stand: Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.8"/4.6cm thick. The stand arm can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG).
- Package included: 1x Windscreen only for Audio-Technica AT2020 microphone, 1x Mic Scissor Arm Stand, 1x Screw adapter (3/8" to 5/8" Match most microphones and shock mount).
Hope this list of the best shockmount for audio technica at2020 will be helpful for you. Feel free to contact us if you have any questions about our site or our reviews, and we will be happy to help you with your purchasing decisions in any way we can.