Are you looking for best rig for bmpcc, we’ve consulted top experts who has in-and-out knowledge about the rig for bmpcc. We choose the top most quality product, which comes with amazing features you’ve never heard before. We have filter more than 100+ of product to give you top 10 list of best rig for bmpcc.
This list is undoubtedly the best rig for bmpcc available in the market today. However, if you don’t want to spend more time on filtering and finding which one is good rig for bmpcc, then you should absolutely go for our Top list of the winner. which comes with all the basic features one could expect in a rig for bmpcc.
Best rig for bmpcc – The Winners!
But these three has some more competitions too, Check out below List of Top 10 best rig for bmpcc.
If you are ready to choose a new rig for bmpcc, check out our recommendations for the best rig for bmpcc. But if you’d like to learn more about the various types of rig for bmpcc available and how to choose the right one for you, read on.
List of Top 10 Best rig for bmpcc In Detailed
Bestseller No. 1
SmallRig Top Handle with 3/8"-16 Locating Pins for ARRI Grip for Camera Cage, Universal Video Rig with 5 Cold Shoe Adapters to Mount DSLR Camera with Microphone/LED Light/Monitor - 3765
- Compatibility : SMALLRIG Top Handle with Locating Holes for ARRI 3765 is designed to facilitate low-angle shot and reduce burdens on arms, compatibility for Universal cold/hot shoe mount
- Lightweight Only 124g : Hollowed-out design makes it weigh only 124g. Mostly made of aluminum alloy, together with anti-slip and anti-freeze silicone
- Built-in Cold Shoe Mounts : It has 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories
- Mounting Points: SMALLRIG Camera Grip has an abundance of 1/4"-20 and 3/8"-16 mounting points for other accessories. An Allen wrench helps tighten the locking screw, making it easy to assemble and disassemble
- Related Products: 3/8"-16 locating holes support Monitor Mount 2903, 2348 to attach monitors; 1/4"-20 threaded holes support Magic Arm 2070 for monitors
SaleBestseller No. 2
SMALLRIG Mini Side Handle Handgrip with Dual 1/4"-20 Screw Mount for Mirrorless Digital Camera DSLR Camera Small Camera Cage Built-in Wrench, Up and Down Adjustable - 2916
- 【SIDE HANDLE FOR CAMERA CAGE】SmallRig Mini Side Handle 2916 is designed for the cages of mirrorless, digital camera, and other small cameras. Two 1/4"-20 screws are fixed to the side of your camera cage. SmallRig 2916 Any cage featuring two 1/4"-20 threaded holes with 18mm distance on the side, such as SmallRig Cage 2999, 2493, 2087 etc.
- 【FOR RIGHT-HAND/LEFT-HAND USE】Highly adjustable to fit different cage height and support the quick switch from left-handed to right-handed through the built-in wrench. If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction. Besides, you could slide up and down for your optional positioning.
- 【ERGONOMIC DESIGN】Made of aluminum alloy and plastic（PC+ABS） with ergonomic design, the portable handle provides filmmakers with a smooth and comfortable shooting experience.
- 【MOUNTING OPTIONS】SmallRig handle 2916 supports additional mounting options - The flash and microphone can be mounted through the cold shoe 1241, and the wrist strap, such as 2456, can be mounted through the eyelet to prevent the camera from accidentally falling off.
- 【LIGHTWEIGHT & PORTABLE】It weighs only 139g. This wooden handle serves as a mini grip, please kindly check other handles on amazon if you prefer larger ones. ( Note: The maximum bearing capacity of the handle is 3.5kg. Please do not overload. )
SaleBestseller No. 3
NEEWER Mini V Mount Battery 6800mAh 99Wh 14.5V, Mini V Lock Battery with 65W PD Type C/D Tap/BP/USB A/Dual DC Port/OLED Display for Video Camera Camcorder Compatible with SmallRig BMPCC 4k 6k, PS099E
- 【6800mAh Rechargeable Battery】 With a 6800mAh capacity (99WH/14.54V), this lithium battery provides strong power for extended video shooting or filmmaking, including 7.7 charges for Canon EOS R5 C, 5.8 charges for iPhone 14 Pro, 3.3 charges for iPad Pro 12.9" (2022) tablet, 1.5 charges for MacBook Pro 14" (2022) laptop, and a 1.5h power supply for MS60C LED Video Light. It can be fully charged in 3h using a 16.8V D Tap charger or a PD fast charging GaN charger set (not included)
- 【V Mount Battery with Multiple Ports】 With dual USB A and USB C, 5.5x2.1mm DC 8V & 5.5x2.5mm DC 12V ports, BP and D Tap interfaces to simultaneously charge multiple devices like DSLR cameras Compatible with Canon Sony Nikon BMPCC 4K 6K Cinema Cameras, field monitor (NEEWER F500, compatible with Atomos ninja v), LED video lights, laptops, tablets, phones, V mount battery plates (ST43, PS003, PS005). Also comes with dust covers to protect the ports
- 【PD65W Bidirectional Fast Charging】 Seamlessly supports PD3.0, QC2.0/AFC/FCP, QC3.0, SCP, DCP-1.5A, PPS, 5V 2.4A for APPLE charging protocol, and more fast charging protocols. The USB C port delivers a maximum 65W two way PD fast charging for your smartphones, tablets, or laptops with a 65W PD charger and cable (both not included), compatible with iPhone 15 Pro Max 15 Plus 14 Pro Max 13 Pro 13 Mini Samsung S22 S23 Ultra Huawei Mate 60 Pro P60 P40 Pro, etc
- 【Intelligent Battery Management System】 Proudly certified by CE/UKCA/PSE/RCM, this V mount battery features an intelligent battery management system (BMS) that automatically protects against short circuits, over voltage, over current, overcharging, and over discharge, and even sends timely alerts in case of over power, over current, over voltage, over temperature, and under power discharge. The fireproof PC V0 shell for enhanced safety and durability
- 【Portable & Airline Friendly】 Palm sized at 4.4" x 2.9" x 2.2" / 111 x 73 x 56.7mm, and weighing just 1.3lb/590g, airline friendly and never adding bulks to your luggage. The 1.12" OLED screen provides real time battery status all at a glance, the power switch saves energy, and the non slip pads on both sides for secure handling during use. If no connection while charging R5/R5 C/R6/R7, just turn off the camera, unplug all cables, reinsert the battery, then resume charging
SaleBestseller No. 4
Zeadio Video Action Stabilizing Handle Grip Handheld Stabilizer with Hot-Shoe Mount for Canon Nikon Sony Panasonic Pentax Olympus DSLR Camera Camcorder
- Nice Gift -- Ideal filming accessory for birthday party, honeymoon, home, travel, banquet to record the happy and unforgettable moments. A nice gift for your friends and family.
- Moving Low Angle Filming -- Ideal for making moving low angle videos and images.
- Wide Compatibility -- Works with all Cameras and Camcorders with a national standard 1/4-20 thread interface.
- Stability -- Great for Skateboarding, Rollerblading, Motor Racing, Biking, Surfing, Hunting, Snowboarding, Skiing and any Extreme Sports Situation where stability is essential.
- Lightweight and Comfortable -- Cushioned NBR padded handle alleviated the stress of lengthy filming.
SaleBestseller No. 5
SmallRig Battery Plate with V-Lock Mount with Dual 15mm Rod Clamp for Camera Power Supply - 3016
- 【V-Lock Battery Plate】SmallRig V Mount Battery Plate with Dual 15mm Rod Clamp 3016 utilizing a standard V mount fits most V mount batteries to provide more excellent battery life for your camera rig with your battery's power port(s).
- 【Comes with Dual Rod Clamp】It comes with a dual 15mm rod clamp, which allows you to mount the battery plate onto standard 15mm LWS rods.
- 【Multiple Mounting Points】The plate itself features multiple 1/4"-20 countersinks, M3 countersinks, M4 countersinks, 1/4"-20 thread holes, M4 thread holes, and a locating hole for ARRI to attach a dual rod clamp, a magic arm, or other accessories.
- 【Wide Compatibility】The mount features a V-lock mount with a quick-release lever that fits most V-mount batteries, but it is not compatible with PAGlink series V mount batteries or Patona Premium Battery for BP-190WS. The mount has no electronics and is meant to mount a battery that has its own power outputs to power your gear.
- 【High Customization】Two stoppers will prevent the battery from twisting when attached. The plate is also for Blackmagic URSA mini. (Note: 1. No V-Lock part (male) provided with the plate. 2. This is purely a mounting solution for a V-mount battery — no power ports on the plate.)
- 【Related Products】SmallRig mini V-mount Battery VB50 (50Wh) 3579 and VB99 (99Wh) 3580 are now available, multi-interfaces and PD fast-charging design, widely compatibility use for cameras, camcorders, monitors, smartphones, etc.
Bestseller No. 6
SmallRig Upgraded Ultra Thin HDMI Cable 55cm/1.8Ft (A to A), 4K Hyper Super Flexible Slim Cord, High Speed Supports 3D, 4K@60Hz, Ethernet, ARC Type-A Male to Male for Camera, Monitor, Gimbal - 2957B
- 【Ultra Thin & Flexible】The ultra-thin and flexible high speed HDMI cable (55m/1.8ft) with 3.6mm diameter fits perfectly in tight spaces, designed for gimbal, camera stabilizer, monitor, wireless video transmitter & receiver and other devices with standard A-type HDMI interfaces to achieve high-speed signal transmission.
- 【High Speed HDMI Cable】Ultra-Slim HDMI 2.0 version standard cable supports ultra HD 4K@60Hz, Full HD 1080P, 3D, Ethernet, Audio Return Channel(ARC), HDR, and you can transmit high-resolution sound formats.
- 【Wide Compability】Compatible with devices with standard HDMI type A connector, including an HDTV, Computer, TV Stick, Roku, Blu-ray DVD player, PS3, PS4, and Xbox, etc.( for BMPCC 4K&6K, for Panasonic S1H/GH5/GH5S, for Z-cam E2, for Atomos Ninja V, for Hollyland Mars 400, etc.)
- 【Stable Connection】SmallRig HDMI connector ensures maximum data transmission and provides pure signal transmission, reliable performance for data transfer, vivid video colors and spectacular surround sound while protecting against EMI/RFI interference.
- 【What you can get】The package include 1 x HDMI cable, 1 x Cable tie and professional after-sales service. Come with a cable tie for cable management to make your rig neat. If you have any questions, please feel free to contact us.
SaleBestseller No. 7
SMALLRIG SSD Mount Bracket SSD Holder for Samsung T5 SSD, for SanDisk SSD, for SanDisk SSD T5, Compatible with SMALLRIG Cage for BMPCC 4K & 6K, for Z Cam E2 & for Sigma fp - BSH2343
- 【UNIVERSAL HOLDER FOR SSD】Firmly secure your SSD on your camera or camera cage, you can choose SmallRig external SSD Mount BSH2343. This spring-loaded clamp is stretchable on both sides, fitting different SSD like for Samsung T5 SSD, for Angelbird SSD2go PKT, for Glyph Atom SSD, for SanDisk 1T SSD, for G-Technology G-DRIVE Mobile SSD and more
- 【MOUNTS ON CAMERA DIRECTLY】This holder could mount an SSD directly on cameras such as for BMPCC 4K & 6K, for Z Cam E2, and for Sigma fp
- 【FLEXIBLE INSTALLATION】This holder comes with a detachable cold shoe which can be fixed on the bottom or side of the holder, so you can mount the SSD to a cold shoe adapter; or after removing it you can use 1/4‘’-20 screw(s) to mount the holder, which is super flexible
- 【USB-C CABLE CLAMP INCLUDED】It comes with a cable clamp to fix the USB-C cable, fastened by a knob screw. This SSD holder is compact and versatile for photographers and video shooters
- 【RUBBER CUSHIONS】The external SSD bracket features soft protective rubber pads inside, keeping the SSD securely in the clamp and preventing scratches
SaleBestseller No. 8
SMALLRIG Adjustable Camera Monitor Mount with Quick Release NATO Clamp, Cold Shoe Mount, Anti-Twist Design for DJI RS 4 / RS 4 Pro/RS 2 / RSC 2 / RS 3 / RS 3 Pro/RS 3 Mini - 3026B
- 【FOR DJI RS 4 / RS 4 Pro / RS 2 / RSC 2 / RS 3 / RS 3 Pro/RS 3 Mini】SmallRig Monitor Mount 3026B is specially designed for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 3 mini gimbal. This mount is designed for adding accessories on both sides of the stabilizer, such as a camera monitor, LED light, sound receiver, wireless device, action camera, etc.
- 【170° Tilt Adjustment】Monitor Mount 3026B can tilt 170 degrees. Different from the old version using Allen Wrench, the tilt tension of this upgraded monitor mount is quickly adjusted via a thumbscrew. With its compact structure and consistent design fits for DJI RS 4 / RS 4 Pro / RS 2 / RSC 2 / RS 3 / RS 3 Pro/RS 3 Mini, it is a perfect match with the stabilizer.
- 【Anti-Twist Design】New Version monitor mount 3026B build in locating pins on the top to further secure the monitor, and a silicone pad to prevent the monitor from scratching and twisting. ( Please note: the max payload is 1.5kg. )
- 【Multiple Mounting Options】There are two 1/4"-20 threaded holes on top of the monitor mount which can be attached with Magic Arm 3238/3873 for action camera or other rigs. On top and bottom of it, there is one cold shoe mount that can be attached to a sound receiver, microphone, LED light, etc.
- 【Firm Locking】The monitor mount can be installed on two sides of the stabilizer by a quick-release NATO clamp and features an anti-removal stud to protect your devices from falling.
Bestseller No. 9
SONY Cinema Line FX30 Super 35 Camera
- 20.1 MP Exmor R APS-C (Super 35mm format) image sensor with wide dynamic range
- S-CinetoneTM for a cinematic look straight out of the camera without grading
- Flexible ISO, Cine EI Quick and Cine EI Log shooting modes for optimized image quality
- User LUTs can be applied to the LCD display and HDMI output and embedded in clips
- Dual Base ISO and a 14+ stop range for wide latitude and low-noise images
Bestseller No. 10
SmallRig Lightweight NATO Top Handle, Quick Release NATO Grip w/NATO Rail for DSLR Camera Cage, Universal Top Handle with 5 Cold Shoe Adapters - 4345
- Comfortable Ergonomic Grip: The NATO top handle features a silicone part with a 4-finger texture, providing a more comfortable and anti-slip grip. It is designed for easy low-angle shooting and to reduce strain on the arms.
- Wide Compatibility: Comes with a 50mm NATO Rail, allowing the top handle to be compatible with any camera cage featuring two 1/4" threaded holes. The handle can slide directly onto the NATO Rail and be secured with the built-in knob, making it easy toassemble and disassemble.
- Lightweight and Solid: The handle w/ NATO Rail is made of aluminum alloy and features a hollowed-out design, which ensures that the handle weighs 144g (0.31lbs) while supporting a weight of up to up to 10kg (22lbs).
- 5 Built-in Cold Shoe Mounts: The front of the handle has 3 cold shoe mounts, while the back end has 2, allowing for connection of up to 5 external devices simultaneously, such as LED light, monitor, microphone, transmitter, and more.
- 12 Threaded Holes: Ten 1/4" threaded holes and two 3/8" threaded holes for arri could attach more accessories, such as monitor mount 2903B and magic arm 2066B.
Hope this list of the best rig for bmpcc will be helpful for you. Feel free to contact us if you have any questions about our site or our reviews, and we will be happy to help you with your purchasing decisions in any way we can.