Are you looking for best audiocontrol sa-3055, we’ve consulted top experts who has in-and-out knowledge about the audiocontrol sa-3055. We choose the top most quality product, which comes with amazing features you’ve never heard before. We have filter more than 100+ of product to give you top 10 list of best audiocontrol sa-3055.
This list is undoubtedly the best audiocontrol sa-3055 available in the market today. However, if you don’t want to spend more time on filtering and finding which one is good audiocontrol sa-3055, then you should absolutely go for our Top list of the winner. which comes with all the basic features one could expect in a audiocontrol sa-3055.
Best audiocontrol sa-3055 – The Winners!
But these three has some more competitions too, Check out below List of Top 10 best audiocontrol sa-3055.
If you are ready to choose a new audiocontrol sa-3055, check out our recommendations for the best audiocontrol sa-3055. But if you’d like to learn more about the various types of audiocontrol sa-3055 available and how to choose the right one for you, read on.
List of Top 10 Best audiocontrol sa-3055 In Detailed
- This wired remote (ACR-3) allows you to easily change the input source, adjust the auxiliary input volume, and adjust the output level of channel 4 (often used for a subwoofer) of the AudiControl LC8i. The remote is designed to be dash mounted, within reach of the driver; it can be mounted under the dash with the supplied bracket, or the bracket can be removed and the knob and LED can be custom mounted through the dash. Pressing the knob engages the auxiliary input.
- Compatible with: LC8i 8-channel line converter, DQ-61 factory sound processor, DQDX digital signal processor, D-4.800 4-channel amp and DSP, D-6.1200 6-channel amp and DSP, DM-608, DM81 digital signal processors, & The Epicenter Amplifiers.
- Mounting Options: The dash control may be mounted under the dash using its own bracket or through a custom hold in the dash. It should be within reach of the driver and in a spot where the LED is plainly visible
- Bracket Installation: The dash control mounts with two screws, which attach to the underside of the dashboard. Slide under the dash and place the dash control in its mounting position, mark the two mounting holes, drill pilot holes, and secure with two screws.
- Custom Installation: For that custom, finished look, the dash control can be flush mounted directly on the dash-board (or anywhere else). Disassemble the dash control from the mounting bracket. Start by pushing the LED from its holder followed by removing the circuit board and rotary control from the bracket. Drill a 9/32" hole in the dashboard for the control along with a 1/8" hole for the lock tab and a 13/54" hold for the LED holder. Reassemble the dash control components on the dashboard.
- High Definition Low-Latency Audio Streaming
- 24 bit / 48 kHz Audio Streaming from Devices with aptX Codec
- IPX5 rated enclosure
- Built in fuse
- Reversible cover plates allow flexible mounting options
- Active speaker-level inputs for OEM integration
- Linkwitz-Riley Crossover
- RCA Line Inputs
- 2-channel RCA inputs and outputs
- adjusts from 0 to -97dB
- remote disassembles for flush-mounting
- Active speaker-level inputs for OEM integration
- Linkwitz-Riley Crossover
- Reversible Cover Plate
- Bulletproof 5 year warranty (when installed by an authorized AudioControl dealer)
- This wired remote (ACR-3) allows you to easily change the input source, adjust the auxiliary input volume, and adjust the output level of channel 4 (often used for a subwoofer) of the AudiControl LC8i. The remote is designed to be dash mounted, within reach of the driver; it can be mounted under the dash with the supplied bracket, or the bracket can be removed and the knob and LED can be custom mounted through the dash. Pressing the knob engages the auxiliary input.
- Compatible with: LC8i 8-channel line converter, DQ-61 factory sound processor, DQDX digital signal processor, D-4.800 4-channel amp and DSP, D-6.1200 6-channel amp and DSP, DM-608, DM81 digital signal processors, & The Epicenter Amplifiers.
- Mounting Options: The dash control may be mounted under the dash using its own bracket or through a custom hold in the dash. It should be within reach of the driver and in a spot where the LED is plainly visible
- Bracket Installation: The dash control mounts with two screws, which attach to the underside of the dashboard. Slide under the dash and place the dash control in its mounting position, mark the two mounting holes, drill pilot holes, and secure with two screws.
- Custom Installation: For that custom, finished look, the dash control can be flush mounted directly on the dash-board (or anywhere else). Disassemble the dash control from the mounting bracket. Start by pushing the LED from its holder followed by removing the circuit board and rotary control from the bracket. Drill a 9/32" hole in the dashboard for the control along with a 1/8" hole for the lock tab and a 13/54" hold for the LED holder. Reassemble the dash control components on the dashboard.
- Remote for Audio Control Processors Remote control assembly with 20 foot cable and mounting plate.LC7DQL-8LCQ-1The Epicenter Plus
- LC7DQL-8LCQ-1The Epicenter Plus
- LC7DQL-8LCQ-1The Epicenter Plus
- Wired remote level/bass control for select AudioControl processors
- 20ft cable and mounting plate included
- Two color LED status indicator
- LED brightens as you increase the output & dims as you decrease
- Mounts on dash using built-in bracket
Hope this list of the best audiocontrol sa-3055 will be helpful for you. Feel free to contact us if you have any questions about our site or our reviews, and we will be happy to help you with your purchasing decisions in any way we can.