Are you looking for best at2020 shockmount, we’ve consulted top experts who has in-and-out knowledge about the at2020 shockmount. We choose the top most quality product, which comes with amazing features you’ve never heard before. We have filter more than 100+ of product to give you top 10 list of best at2020 shockmount.
This list is undoubtedly the best at2020 shockmount available in the market today. However, if you don’t want to spend more time on filtering and finding which one is good at2020 shockmount, then you should absolutely go for our Top list of the winner. which comes with all the basic features one could expect in a at2020 shockmount.
Best at2020 shockmount – The Winners!
But these three has some more competitions too, Check out below List of Top 10 best at2020 shockmount.
If you are ready to choose a new at2020 shockmount, check out our recommendations for the best at2020 shockmount. But if you’d like to learn more about the various types of at2020 shockmount available and how to choose the right one for you, read on.
List of Top 10 Best at2020 shockmount In Detailed
Bestseller No. 1
SUNMON AT2020 Shock Mount, Shock Mount Stand Reduces Vibration Noise for Audio Technica AT2020 AT2035 AT4040 AT2020USB ATR2500x Condenser Micphone
- Suspension shock mount mic holder isolates condenser mics from most physical vibration, floor noise. Like floor tapping, desk bumping, adjusting the boom.
- Shockmount made of elasticity rope, the plastic shock mount prevents the microphone from falling all-around and makes your AT2020 microphone more convenient to install.
- Widely used for Audio Technica AT2020 AT2035 AT4040 AT2020USB ATR2500x condenser mic.
- The angle-adjustable 3/8" to 5/8" screw adapter is easily attached to any universal mic boom arm or mic stand.
- Fits microphone diameter ranging from 1.9" to 20."（ Φ47mm-51mm）. Package: 1 x Shock Mount.
Bestseller No. 2
Boseen Universal Elastic Bands Replacement, Anti-aging Rubber Ring for Microphone Shock Mount Holder Clamp Clip, Set of 4 (Gray)
- Economic and valuable - Still worrying about spending extra money buying a shock mount because of the aging break of the rubber band? Boseen offer you a more economic and valuable new option! Buy our rubber bands, you don't have to spend extra money buying an extra shock mount.
- Universal for most shock mounts - Package comes with 4 pieces of elastic bands, which can be applicable for most types of shock mounts. (Two sizes of elastic bands are not suitable for Blue Yeti shock mount!!)
- 2 Different sizes of rubber bands - If the shock mount you used is a large one which is suitable for microphone like Neumann, Rode, Samson, Blue, you can use the large two rubber bands in our package. If the shock mount you used is a small one which is suitable for mic like AT2020, you can use the other two small rubber bands.
- Durable and sturdy - High quality strong rubber bands for durable and sturdy construction, which can be used for a longtime.
- Convenient and practical - 4 rubber bands in one package can meet your different needs. For a long time after purchase, you don't have to worry about the aging of the rubber bands.
Bestseller No. 3
AT2020 Shock Mount - Microphone Mounts Reduces Vibration Noise and Shockmount Improve Recording Quality for Audio Technica AT2020 AT2020USB+ AT2035 ATR2500 AT4040 Condenser Mic by YOUSHARES
- Shock mount fit diameter size: ( 45mm-50mm，1.8 inch-2 inch ) microphone, Such as: AT2020, AT2020USB, AT2020USB+, AT2035, AT4040, ATR2500x, AT4033, AT2050, CAD U37, RE20, MXL440, MXL 500, MXL 4000, MXL V67G, MXL550, Floureon BM700, Floureon BM800, Rode NT1
- Shock mount Diameter size: ( 45mm-50mm，1.8 inch-2 inch ) , Compatible with many condenser Microphone. Shock Mount isolates the microphone from noise, shock and vibrations. Like floor tapping, desk bumping, adjusting the boom, etc.
- Boom Arm Capability - With a 3/8"-5/8" screw adapter. Perfectly match the most of boom arm and microphone stands.
- Exquisite Design - The shock mounts are framed with an easy pinch-to-open clamp and a nice foam padding.
- Great for your YouTube videos, podcasting, online games. Package include Microphone Shock Mount, universal connector adaper.
SaleBestseller No. 4
InnoGear Desktop Microphone Stand, Mic Stand Desk Table with Weighted Base Shock Mount Mic Clip 3/8" to 5/8" Adapter Adjustable Height for Hyper X QuadCast Fifine K669B AT2020 Shure SM58 PGA48
- Compact and Weighted Base: With 4.3"x4.7" base, InnoGear desk microphone stand doesn't taking up much space. The base is weighted 1.32lbs for MAX load 3.3lbs when using heavier microphones that need additional balance. It is constructed of heavy-duty steel for long-term performance.
- Triangle Gravity Design: Unlike other mic stand with central gravity, InnoGear table mic stand provides more stability and precise balance to keep microphone from topple-over.
- Adjustable Height: This stand measures 10.2 inches in height and is adjustable up to 15 inches to allow for optimal mic positioning.
- Compatibility: Package includes 3/8" and 5/8" adapter, making it compatible with many microphones like Blue Yeti, Blue Snowball, AT2020, AT2020USB+, AT2035, ATR2500-USB, ATR2100-USB, etc.
- High Quality Shock Mount: It can protect your microphone all-around with high elasticity wrap roping desigh and reduce vibrations from traveling into the microphone. Please noted the shock mount is not fit for Blue Yeti.
SaleBestseller No. 5
Marantz Professional MPM-1000 - Studio Recording XLR Condenser Microphone with Desktop Stand and Cable – for Podcast and Streaming Projects
- Studio-grade condenser microphone that delivers premium audio performance for crystal clear audio capture - perfect for vocals, acoustic instruments, amplifiers and more
- Directional cardioid polar pattern and pure-aluminum-plated, 18mm-diameter-diaphragm condenser capsule
- Smooth, wide ranging frequency response (20–20,000Hz) captures the full audible spectrum
- High sensitivity and low signal-to-noise ratio captures every subtle nuance of your source audio
- Compact footprint and lightweight form factor for portable audio capture
SaleBestseller No. 6
InnoGear Microphone Stand, Mic Stand Detachable Gooseneck Mic Floor Stand Height Adjustable from 32” to 70” with Weighted Round Base for Blue Yeti Blue Snowball Shure SM7B Shure SM58 Samson Q2U
- Height Adjustable & Stable: By adjusting the clutch, the height of this InnoGear mic stand is adjustable from 32 inches to 70 inches, used for person standing or sitting. Compared to other stands using three height clutches on the market, this stand uses only one height clutch and one separate extension pole which is connected by a long screw adapter to improve the stability.
- Flexible Gooseneck: The gooseneck is 360° adjustable, being flexible to adjust for singing or for an instrument. It can be positioned at whatever angle you need it at. Meanwhile, it is of high quality and is sturdy enough to support your microphones. The included mic clip is able to be rotated by 180°.
- Heavy-duty Round Base: The weighted round base of the mic stand weighs 4.5 Lbs in the diameter of 9.8 inches, being more stable and having larger bearing capacity, unlike other tripod stands. The bottom of base is built with 6 non-slip pads. An upgraded fixing loop is added between the connection of base and the boom stand to further enhance stability and avoid any wiggle.
- Detachable & Portable Stand: This gooseneck floor stand can be disassembled into four parts in seconds. It is easy to carry and install which provides great convenience for various types of activities like stage, studio, road show, concert, outdoor performances and more.
- Wide Compatibility: This upgraded mic stand fits for most types of microphones like HyperX QuadCast, Fifine K669B (Attention: Shock mount not included), Blue Snowball iCE, Blue Yeti, Audio-Technica AT2020, Audio-Technica AT2035, Samson Q2U, Razer Seiren X, Shure SM58, Shure PGA48, Shure SM7B and so on.
Bestseller No. 7
Microphone Shock Mount with Pop Filter, Mic Anti-Vibration Suspension Shock Mount Holder Clip for Diameter 46mm-51mm Microphone
- Shock mount (size: 45mm-53mm，1.77inch-2.1inch ) for microphone type: Diameter of 46mm-51mm (1.8 inch-2 inch)microphone. Compatible with Many Condenser Mics Like AT2020, AT2020USB, AT2020USB+, AT2035, AT2020USB, ATR2500x.Please kindly measure your product dimension and confirm the same. If unsure if applicable, please leave your question.
- Pop filter (inner size: 40mm-61mm,1.6 inch-2.4 inch) for microphone head type: Diameter of 46mm-51mm( 1.8 inch-2inch) microphone. Please Verify your microphone size before ordering.
- Boom Arm Capability: The adjustable 3/8" to 5/8" screw adapter is easily attached to most of universal mic boom arm or mic stand.Please kindly measure your product dimension and confirm the same.
- Pop filter:U-shaped double net layer structure, foam layer, metal net layer can effectively reduce the plosive, wind interference, saliva spraying. Shock mount:Made of high quality metal and high elasticity rope. It can protect the microphone all-around with high elasticity wrap roping desigh, (It can not fit blue yeti), which make the microphone more convenient to install and prevente the microphone from falling.
- Package include Microphone Shock Mount + Pop Filter,and come with one universal connector adaper,Combination with these two making your broadcast or singing voice sounds more pleasant.
SaleBestseller No. 8
Professional Studio Recording Microphone Isolation Shield, Pop Filter,High density absorbent foam is used to filter vocal. Suitable for Blue Yeti and other condenser microphones (AO-504 With Stand)
- 【The package contains】: Microphone Isolation Shield x 1, Metal Thread Adapter x 2 (Adapt most microphones), Adjustable Stand x 1 and instruction manual. (The height of the isolation shield can be adjusted freely) *NOTE: Microphone is NOT included.
- 【Designed for recording】: The inside of the microphone cover is made of absorbent cotton material, which maintains the clarity of the human voice and the instrument during recording, eliminating the interference of the audio waves and the external environment.
- 【Rugged & Durable】: Made of high-quality steel, the Microphone Isolation Shield is more rugged and scratch-resistant.
- 【Easy to install】: The Microphone Isolation Shield has steel clips on the back. Insert the steel clip into the stand and tighten the screws.The height of the stand is 182CM, and you can install the isolation shield to any height you want.
- 【Special recording】: This acoustic shield features an acoustic foam front and a vented metal back plate. If you need to record in the studio, this Microphone Isolation Shield will give you unexpected results.
Bestseller No. 9
Boseen Microphone Shock Mount Mic Holder - Anti Vibration Spider Shockmount Compatible with Many Condenser Mics Like AT2020 MXL 770 MXL 990 Samson G Track Pro Rode Procaster NT1-A Neumann U87 etc.
- Anti vibration and noise - This shock mount mic holder can isolate condenser mics from most physical vibration, floor, and stand noise effectively. And it’s ideal for recording, podcasting, broadcasting and more. It will make your broadcast or singing voice sound better.
- Applicable for many mic types - One shock mount is equipped with 4 different bottom screws, which can compatible with multiple microphone styles, for instance, AT(2020, 2020 USB), Rode(NT1-A, Procaster, Podcaster, K2, NTK, NT2000, NT2-A, NT1000), Samson(C01, C03, C01U, C03U, CL7, CL8), MXL(990, 770, R77, TEMPO, V67G, 2006), AKG(P120, P220, P420) , Blue(Ember, Bird SL, Babybottle SL, Spark SL except Yeti, Snowball, Nano), Neumann U87 and Scarlett Cm25.
- Durable and Adjustable-The shock mount was totally made of Heavy-duty solid metal, except the elastic band and pad. It also came with mounting pads to protect the bottom of the mic. Features an angle adjustable locking knob with a 5/8 inch screw hole, which can be easily attached to any universal mic boom arm or stand.
- ! NOTE ! - 1. The shock mount is not compatible with handheld mic, such as SM58, Q2U, ATR2100. 2. It’s also not suitable for many USB microphone with function knobs, such as Fifine, Blue Yeti/Snowball, Razer. (The threads’ diameters which are less than 20mm are not suitable. Many USB microphones’ bottom threads are 5/8 inch which is far less than 20 mm.) 3. Microphones without threads at the bottom cannot be tightened on our shock mount, such as AT2035/2050, Heil PR40.
- Best service - We promise to provide timely response within 24 hours and lifelong technical guidance.
Bestseller No. 10
Boseen Universal Microphone Shock Mount, Mic Clip Holder Mount for Diameter 47mm-53mm Mic Anti Vibration Adjustable High Isolation Shock Mount
- Universal for many mic types - Our professional suspension shock mount is a nice accessory for condenser microphones diameter ranging from 47mm to 53mm, such as AT2020/2020USB+/2020USBi/2020 xlr/2035/2050/2500/2500USB, AKG P100/P200/P120/P420/C3000B, MXL V67g/V67i, Rode NT1A/NT1, Heil PR40, Razer seiren x, Berhinger C-1, ATR 2500 USB, Neumann TLM102 and so on.
- Great Design and Well-made - Made of solid metal and high quality elastic band. The mic shock mount features a highly flexible surround design that protects the microphone all-around, which make the microphone more convenient to install and prevent the microphone from falling.
- Adjustability and Flexibility - This microphone holder features an angle adjustment with locking knob, so that you can mount it on all the standard microphone stands.
- Anti Vibration and Noise - This mic holder can isolate studio condenser mics from most physical vibration, floor, and stand noise effectively, it will make your broadcast or singing voice sounds more pleasant.
- Please Note - 1. Package includes a microphone shock mount, a screw adapter and a elastic band. 2. The shock mount only fits mic diameter ranging from 47MM to 53MM. Please verify your microphone size before ordering!
Hope this list of the best at2020 shockmount will be helpful for you. Feel free to contact us if you have any questions about our site or our reviews, and we will be happy to help you with your purchasing decisions in any way we can.